If you wish to add an electric motor to your Shaka flying wing, this KIT will help you with this task.
It provides the parts for an easy installation of a 14XX or 15XX series drone motor with an M2 12x12mm mount layout. I.e. Emax ECO series 1407, T-Motor F1507, or similar with the outside diameter of up to 19mm.
The KIT includes a new firewall, nose-fill balsa parts, and some additional elements.
For the building tips, please refer to the Shaka E-Fuse assembly guide.
The front plywood part is designed to fit 25mm or 30mm folding spinners for you to have a wider choice.
Note: this KIT does not provide any thrust angles. The motor is being installed straight as the original Shaka KIT was not designed for motor installation and can not provide the needed thrust angles. In case you prefer down and right thrust, check the Shaka E-Fuse KIT instead
It can be used while you are building your original kit, as well as if you have your pure glider model flying already.
The flying weight of the e-powered model is approx. 10-15g heavier than the pure glider version as the motor and a spinner replaces the lead that is required for a correct CG.
Motor: 14XX or 15XX series drone motor with an M2 12x12mm mount layout (i.e. Emax ECO series 1407, T-Motor F1507)
ESC: Any lightweight 20-30A ESC
Battery: 2S 300-450mAh 60C+ LiPo