4.7×2.4 Folding Prop & 25mm T-Mount Spinner

Description

Choosing a powertrain for tiny mosquito-class RC gliders might be a challenge.

But no more with a VM T-Mount 25mm Spinner and a 3D printed folding 4.7 x 2.4 Prop.

It is designed to pair up with the tiny T-Mount drone motors, that uses two M2 screws to fix the whole folding prop assembly onto the bell.

1107, 1404, or any motor size in between these mounts right inside the spinner, making it easy to fit the entire powertrain onto the nose of your mosquito-class RC glider.

To make sure you have enough clearance between a spinner and a firewall, where the motor is mounted, you might need to use a provided spacer for the “shorter” motors, like 1404.

The prop blades are 3D printed using SLA method that ensures maximum strength and precsision.

The parts have some signs of supports from printing, so will require a touch of wet-sanding with a fine sandpaper, to get a smooth finish.

Important: Use this prop ONLY with motors below 4000kv

What You Get

Spinner Diameter – 25mm
Spinner Mounting – T-Mount
Folding prop – 4.7 x 2.4 3D printed (SLA) blades. Require a 3 mins of wet-sanding to finish.
Spinner Mounting Bolts – M2
Prop mounting pins – 1.5x10mm
T-Mount Spacer – 3D printed (PETG) 1.75mm spacer.