Sale!

Maverick 1.5m Full-House RC Electric Glider

$150.00

Available on backorder

Description

RC electric gliders in a form of F5K models have gained a lot of popularity in recent times thanks to the compact size and great performance they provide.

The only drawback of the most molded carbon F5K gliders is their high price point.

Maverick is here to change this!

It is a full-house 1.5-meter balsa kit that you can build yourself in a workshop and join your local F5K competition!

At the same time, the price isn’t breaking the bank.

It is easy to build using the basic tools such as:

  • Sharp Hobby Knife
  • Scissors
  • Sand Paper
  • Cyano Glue
  • D2 or D3 Class PWA Glue
  • Covering Iron
  • Screwdriver

A Kit Contains

– All balsa and plywood parts
– A colored 1:1 scale assembly plan
– Accessories pack that includes wing mounting bolts, nuts, pushrod material, GF control horns, pull-cables, torsion spring material, etc.
– Carbon tubes and rods required for assembly.

Covering film and 2x 50mm JR-style servo extensions are not included and should be purchased separately.

For more details and building tips, please check an RCGroups thread on Maverick

A Potrable RC Electric Glider

Maverick features a 3-piece wing with a central section and removable wingtips. The Fuse is one piece with a classic cross tail that is also fully removable.

So, you can take your glider apart and pack it for easy transportation or storage.

Tehnical Data

Wingspan: 1500mm
Airfoil: AG455ct mod
Flying weight: ~300g
Controls: Elevator, Rudder, Ailerons, Flaps, Throttle
Skill level: Intermediate
Flight style: Thermal hunting and F5K competitions

Recommended Gears

  • 450-550mah 7.4v 2s 70c LiPo (Gumstick Style)
  • 6x JX DPI DHV56MG/TGY D56MG or KST X06
  • 2x 50mm servo extensions with JR-style connectors for installation into the central wing section.
  • T-Motor F1507 3800kv, or a similar outrunner.
  • 30mm or 25mm Spinner and 6×3 folding prop
  • ~20A ESC
  • 7 Ch (or 6 Ch + 1 SBUS Ch) recever
  • Radio translmitter with electric glider programming features

Recommended Settings

CG: 87mm
Aileron throws: TBA
Flap throws: TBA
Rudder throws: TBA
Elevator throws: TBA
Camber settings by flight modes:
– Speed: the bottom of the wing profile and flaps/ailerons are flat
– Cruise: the top of the wing profile and flaps/ailerons are flat
– Thermal: 3-6mm down of the cruise mode

You may also like…