Maverick is an RC electric glider that was designed for thermal hunting and F5K competition flying.
This is a B-Grade KIT item, which means that some of the sheets included in this lot may have some minor defects. To complete it you will need to use a little extra effort compared to the normal kit.
Usually, you’ll need to cut out the parts from the sheets where Laser couldn’t do that properly.
Rarely, you’ll need to replace some parts. In this case, you can just use the leftover sheet material for this purpose.
In most cases, though, the defects are minimal and you can simply get away with them as they are.
If some major parts are defective, you’ll get the replacement in the box.
A Kit Contains
– All balsa and plywood parts
– A colored 1:1 scale assembly plan
– Accessories pack that includes wing mounting bolts, nuts, pushrod material, GF control horns, pull-cables, torsion spring material, etc.
– Carbon tubes and rods required for assembly.
Please, refer to the images to set estimations for the quality of the parts you’ll get. These are not exact images, your specific kit may look different, but these will give you a general understanding of what to expect.