In general, setting up an RC Glider should be quite a simple task. If you have some experience with other types of airplanes – great! But, if you are a complete newbie, some obvious things become not so… So, in this article, let’s get an RC Glider Setup sorted from start to finish. But first,…
Author: Evgen
BLHeli ESC: Settings For RC Gliders

Choosing a powertrain for a powered RC glider was never a challenge. Usually, you have numerous options for any wallet. However, with the rise of the FPV drone industry, flexible, often open-source ESC firmware has also become a huge thing. And the choice expanded massively. In this article, you will learn about BLHeli ESCs and…
FrSky Xact Servo Programming Guide
Brah – Full-House Wing Assembly Guide

Brah, aka Shaka XL, is a 1.5m / 40in flying wing with flaps and ailerons that provides you with ultimate control over your RC Glider. This model is a long-awaited development of the original Shaka Slope Wing. It preserves the original shape while adding some features that did not exist in the previous design. On the other side,…
DIY RC Glider – The Lull DLG Build Guide
![[DIY] DLG Glider - The Lull Build Guide](https://flightpoint.co/wp-content/uploads/2024/09/diy_dlg_glider_lull_build_guide.webp)
Looking for a guide to the Lull Balsa DLG build? You are in the right place. Lull is a beginner-friendly DIY DLG Glider that you can build yourself from balsa, carbon, and plywood parts provided in the kit 🙂 The build is relatively simple but would require basic skills for working with wood and essential…