Shaka Slope Glider [B-Grade]

Description

Shaka is a Slope Wing designed for light to medium wind conditions.

This is a B-Grade KIT item, that means that most of the sheets in it will have some minor defects and you will need to use a little more manual labor revealing the parts from the balsa or plywood sheets.

Rarely, you’ll need to replace some parts. In this case, you can just use the leftover sheet material for this purpose.

In most cases, though, the defects are minimal and you can simply get away with them as they are.

If some major parts are defective, you’ll get the replacement in the box.

Please, refer to the images to understand the quality of the parts you’ll get. These are not exact images, your specific KIT may look different, but these will give you an understanding of what to expect.

A KIT Contains

– All balsa and plywood parts
– A colored 1:1 scale assembly plan
– Accessories pack that includes wing mounting bolts, nuts, servo, and control horn linkages.
– Carbon tubes and rods required for assembly.

If you’d prefer an A-Grade quality KIT, please, check the original Shaka listing instead.