Malibu 1m DLG [ARF]

$230.00

Out of stock

SKU: 015 Category:

Description

This is a used (less than 1 hour in the air) B-Grade model that had some minor cosmetic defects, built with 3 Emax ES9051 servos, for Aileron and Elevator controls.

Yes, it is rudderless.

Comes ARF, with a 600mAh 1S LiPo battery that makes it for a perfect CG position if hooked directly to the Rx w/o voltage booster.

Emax servos inside work great on 1S LiPo – fast and accurate, so there is no need for a booster.

This model has no rudder control and features a spring-loaded full flying stab with pull-cable for pitch control. The last can be easily converted to a conventional pushrod if needed.

Also, it features the upgraded short nose, which became available in the later KITs.

The canopy hatch is being held with a clear tape ring for easy pod access.

This is a Spread Carbon layup, so the wings and tails are super strong and light.

All 3 servos are screwed onto the plywood servo mount with M2 screws. The servo mount is also screwed to the pod with M3 hex bolts. This makes it for a great beginner model as you can easily unscrew a few bolts and replace a servo if needed.

Technical Data

Wingspan – 1 meter
Length
Controls – 3 channels (Ailerons & Elevator)
Servos – 3x Emax ES9051
Battery – 1S 600mAh LiPo
Flying weight – 155g (w/ 600mAh 1S LiPo)

Required

Only needs an Rx and Tx of your choice to get it airborne.

Reviews

There are no reviews yet.

Be the first to review “Malibu 1m DLG [ARF]”

Your email address will not be published. Required fields are marked *

You may also like…